Free tools
English
Tile · Layout · Planner
Tile · Layout · Planner. Inputs: Length (cm), Width (cm), First (cm), Second (cm), Joint gap (cm), Waste (%). Enter your values and run. Try the example to learn the format, then copy or save the result.
No account needed
Loading tool…
How to use
- 1Inputs: Length (cm), Width (cm), First (cm), Second (cm), Joint gap (cm), Waste (%).
- 2Run the tool and review the result.
- 3Copy the result or change inputs to compare.
Good to know
Calculated from your inputs. Check units and assumptions against actual conditions.
Ads may process connection data. Personalization follows your privacy choices. Privacy (English)
Worked input and output example
These results come from this tool’s actual engine using the sample values below, not your personal input or saved work. Load the example in the tool to inspect the same inputs.
Example input
| Field | Value |
|---|---|
| Length (cm) | 400 |
| Width (cm) | 300 |
| First (cm) | 30 |
| Second (cm) | 30 |
| Joint gap (cm) | 0.3 |
| Waste (%) | 10 |
Example result
- Rows
- 14
- Columns
- 10
- Tile
- 154
How this tool calculates
grid count uses tile and joint widths; surplus is user supplied
Input constraints
These are the actual input validation limits; they are not a guarantee that every accepted value is realistic or that a model applies to your situation.
- Length (cm): Accepted range: 0.000000001 ≤ x ≤ 1,000,000,000
- Width (cm): Accepted range: 0.000000001 ≤ x ≤ 1,000,000,000
- First (cm): Accepted range: 0.000000001 ≤ x ≤ 1,000,000,000
- Second (cm): Accepted range: 0.000000001 ≤ x ≤ 1,000,000,000
- Joint gap (cm): Accepted range: 0 ≤ x ≤ 10
- Waste (%): Accepted range: 0 ≤ x ≤ 100